WEICHAI Engine,DEUTZ engine. 1002149621 Ideal Wheel.

WEICHAI Engine,DEUTZ engine. 1002149621 Ideal Wheel.
Description

Product Overview

This idler wheel sits on the front-end drive of a Weichai or Deutz engine and guides the belt that turns the fan, the alternator and the water pump. The pulley body carries a grooved contact face, so the ribs of the belt stay in their channels at working speed instead of climbing off the edge, and a single threaded mounting stud takes the fixing to the bracket already on the engine. When an idler is on its way out the belt usually speaks first: a chirp at start-up, black dust around the front cover, or a belt that keeps walking towards the edge of the pulley. Fitting a new one puts the belt back on line and takes the load off the tensioner and everything the belt drives. We supply it as a new unit, matched to the number stamped or cast on your old pulley, and it is one of the smaller items in a heavy equipment spare parts order even though a failed idler can stop a machine as surely as a failed pump.

Key Features

  • Grooved belt face — the belt ribs run in machined grooves, which is what keeps the belt centred at working speed instead of drifting across a flat face. The crane sheaves we supply are machined to the same principle — the groove is cut to the rope that runs in it.
  • Single threaded mounting stud — one fixing point, so the pulley goes straight onto the bracket already on the engine, with no adapters or spacers to source.
  • Free-running hub — spin it before you fit it. It should turn smoothly with no roughness and no side play, and the same check at every service will catch a bearing on its way out.
  • Black pulley body with a red mounting stud — the contrast makes a corroded or damaged unit easy to pick out during a walk-round on a dirty engine.
  • New condition — supplied as a new part; we do not send reconditioned or used idlers out as new.
  • Checked against the reference — every order is picked against the number you send, not against a photograph that looks close.

Weichai & Deutz Engine Fitment

Weichai and Deutz engines both use a front-end accessory drive, and both turn up in the machines our customers run — Weichai units in SANY and XCMG cranes, rotary drilling rigs, loaders and excavators, Deutz units in older equipment and in machines built for export. That spread is why a pulley that looks identical can carry several different numbers: front covers, brackets and belt layouts change between engine builds, and an idler that clears one bracket will not necessarily clear the next. It is the lesson crews learn with any crane spare part, undercarriage included — the number on the old item is worth more than a matching photograph.

Look for the number stamped or cast on the old pulley, then note the engine plate: family, serial, and often a build code. Send both and we will confirm whether this idler is the one that engine calls for. Where a number has been superseded we cross-reference the newer replacement, and if the old part has no legible marking left, photograph it face-on and from the side, measure across the pulley face and count the grooves — those three details usually settle it.

Do not fit by eye. A pulley a few millimetres out in offset, or one groove out in profile, will eat a belt in a short time and the damage shows up somewhere else on the engine. The same rule holds whether the item is an idler or a crane cabin: the number decides, not the bench comparison.

Specifications

PropertyDetail
Part number1002149621
Part typeIdler wheel (pulley)
Part categoryFront-end drive idler, engine wear part
Also known asIdler pulley, belt idler pulley, guide pulley, grooved idler
Engine familyWeichai, Deutz
FunctionBelt routing and alignment on the engine drive
Belt contactGrooved pulley face
Groove countConfirm against the old pulley before ordering
FixingThreaded mounting stud, single point
HubRaised centre hub
ConditionNew
Supplied asPulley with mounting stud

Engine Filter References

  • WEICHAI B7383 (612630010239, 1000428205, 1000428206) — oil filter
  • WEICHAI BF1297 (612630080088, 1000422381) — fuel water separator
  • WEICHAI BF1297-O (1000495963) — fuel filter / water separator
  • WEICHAI BF9817 (612630080087, 1000422382, 1000632619) — fuel fine filter
  • WEICHAI BF1383-O (612600081335, 1000588583, 1000632616, 1000424916) — fuel water separator
  • WEICHAI BF9867 — fuel water separator
  • WEICHAI PF70002 (611600080112) — fuel filter
  • WEICHAI PF70001 (611600080113) — fuel fine filter
  • CHAOCHAI BF9843 (NGD3.0-CE4.15.110; Foton 1103911500001) — fuel fine filter
  • CX0711-AF — fuel filter
  • CUMMINS BF80001-0B (4988297, 5300516; Fleetguard FS19816, FS36230) — fuel water separator
  • CUMMINS BF80008-S (QSB6.9 / QSL9; Fleetguard FS19732) — fuel water separator
  • CUMMINS 3889310, 3889311, 3310169, 3908616, 3401544, 4920071, 2882673, 2882674 and 4056964 — fuel filters
  • DAHL200 (1000FH) — fuel water separator assembly
  • WBF1016 — fuel fine filter
  • Cat 509-5694 and 434-3928 — fuel filters
  • Cat 523-4987 — fuel/water separator
  • Cat 1R-0719 — hydraulic oil filter
  • These are the references we handle most often, listed as cross-references rather than a fitment guarantee: send the engine plate and we will confirm the exact element, and tell you if the number on your machine has been superseded.

Industry Applications

ApplicationTypical work
FUWA QUY crawler cranesEngine overhauls — idler, belts and filters ordered together
SANY SR220 / SR360 rotary drilling rigsFuel system maintenance between jobs
XCMG XCA / XCT all-terrain cranesFront-end drive work and valve train jobs
Crawler crane fleetsUndercarriage part replacement alongside engine service
Weichai-powered loaders and excavatorsBelt drive renewal in the workshop
Port, yard and plant maintenance teamsPlanned heavy equipment spare parts replenishment
Boom and rigging shopsCrane sheaves, pulleys and rope hardware
Warehouse and yard operationsForklift spare parts alongside crane items
Idler pulley with black grooved wheel, red stud and retail box.

Wider Parts Range

  • Crawler undercarriage — track shoes, track rollers, upper and lower rollers, sprockets and idlers, including the undercarriage part that wears fastest on your machine.
  • Structural parts — boom sections, pins, link panels, counterweights, lifting hooks and wire rope: the heavy crane spare part side of what we hold.
  • Crane sheaves — sheaves and pulleys in steel or MC nylon, machined to the dimensions you send.
  • Operator comfort — crane cabin shells, glass, seats and cab fittings, crated so they arrive square.
  • Forklift spare parts — a small but steady line for Toyota and other warehouse trucks.
  • Hydraulic, electrical and planetary groups — pumps, motors, valves, controllers, monitors, sensors and final-drive gears.
  • Engine groups — fuel system parts such as pumps, injectors and filters; cooling parts such as water pumps, thermostats and radiators; valve train parts including heads, valves and seats; lubrication parts including oil pumps and coolers; plus the gaskets, seals, belts and wear items that go with them.
  • Everything else — if you cannot see it, ask. A good share of what we ship never reaches a catalogue, and a photograph of the old part is often enough for us to trace it.
  • Buying across brands — most crane parts suppliers stop at their own franchise; we will put SANY, XCMG, ZOOMLION and FUWA lines on one quotation.

Ordering & Delivery

  1. Send the reference you need — the number on the old part, the machine model and the engine serial or VIN where you have one. Mixed lists are normal, so a filter set, an idler wheel and a hydraulic item can sit on the same enquiry.
  2. We confirm the match and quote it. Minimum order is 1 piece, so a single pulley or a full service list is equally fine.
  3. Payment is by T/T; Western Union or as agreed. We confirm the details on the quotation before anything ships.
  4. Most parts in stock. Usually need 7-20 days, according to the quantity — we will tell you which side of that window your order falls on when we confirm it.
  5. Shipping is EXW, FOB, CFR, CIF; shipped via Shanghai, Dalian, etc. Tell us which term suits your forwarder and we book accordingly.
  6. Orders are packed for export in plywood boxes and cartons, with the part number marked on the outside.
  7. Warranty: 2500 working hours or one year. Keep the packing list with the part number — it is what we will ask for if a claim ever comes up.

Belt Drive Refit

  1. Sketch or photograph the belt routing before anything comes off, marking which side of each pulley the belt runs on. Engines that drive a grooved idler usually carry a smooth pulley close by, and putting the belt back on the wrong side of one pulley is the most common reason a fresh belt chirps from the first start.
  2. Take the belt off and work the tensioner arm by hand. It should move against its spring and return on its own; an arm that is stiff, gritty or slow to come back will wear a new idler wheel as quickly as the old one wore the belt, so price it into the same job.
  3. Spin every pulley the belt touches — water pump, alternator, fan hub and any fixed idler. Roughness, side play, or a coolant weep at the pump seal means that item should be renewed now rather than next month, when the belt has to come off all over again.
  4. Fit the new idler on its threaded stud and tighten it to the figure the engine manual gives for that bracket. Then check that the pulley face runs square to the belt and that the ribs sit fully down in the grooves with no offset at the edges.
  5. Look at the belt on both sides. Cracked ribs, a glazed back or a rib torn away means it is finished; running a worn belt on a new pulley shortens the life of both and turns a low-cost part into an expensive repair.
  6. If the water pump or thermostat is being changed at the same time, add the coolant to the order. It is also the moment to look at the hoses and clamps behind the belt, which are far easier to reach with the belt out of the way.
  7. Fill the rest of the box with the service items due on the same engine — an oil filter such as WEICHAI B7383 (612630010239, 1000428205, 1000428206), a BF1297 fuel water separator (612630080088, 1000422381) or a BF9817 fuel fine filter, plus any air filter and coolant the schedule calls for. There is no need to build a bulk order: a single pulley or a mixed list of construction machinery spare parts travels in the same export box.
  8. On the first run, listen at idle for the chirp that started the job and check for black dust around the front cover after a shift. If either comes back, stop and recheck belt seating and tensioner travel before the machine goes back to work.

Technical Support & Model Matching

Not sure which part fits your machine? Send the part number, the machine model, and a photo of the nameplate or the worn item, and our engineers — each with more than ten years in the construction machinery business — will confirm the correct reference and quote it. We advise on installation, help trace faults, and answer technical questions before and after dispatch. Since 2017 we have built this support on a supplier network covering FUWA, SANY, XCMG and ZOOMLION, so older and hard-to-find references can usually still be sourced.

FAQ

Are these parts compatible with Chinese-built Cummins engines?

Yes. The Cummins references we hold cover engines built and used in China as well as the global variants, including Dongfeng Cummins and Xi'an Cummins installations, and the Fleetguard numbers sit beside them so you can cross-check against the element already on the engine. Engine builds change, so send the plate details before a large filter order.

How can I verify that a part is the right one, and new?

Start with the number. Every crane spare part we ship is picked against the reference on your order, so the first check on your side is to compare that reference with the number stamped or cast on the old component and with the entry in your parts book. If the old part has no legible marking, photographs beside a ruler usually settle it — we compare the profile and the groove count with the stock item. If your workshop needs traceability paperwork with the shipment, say so at enquiry stage and we will tell you what can be provided for that reference.

Do you supply parts for engines other than Cummins?

Yes. Weichai and Deutz are the two families behind this idler wheel, and we also handle Chaochai and Shangchai plus the Cat and Fleetguard references listed with the filters, for SANY, XCMG, ZOOMLION and FUWA equipment. We supply heavy equipment spare parts across those brands and the engines that power them, so if your engine is not on the list, send the plate details and we will check what can be sourced before you commit.

What can I do if a machine is down and I need a repair urgently?

Message or call with the number and the machine serial and say clearly that the machine is standing. We handle construction machinery spare parts for sites like yours every day, and we will confirm stock or the shortest route to the part and quote the fastest freight option that works for your location. On-site support depends on where the machine is and which engineer is free, so ask your sales contact about availability rather than assuming it; for a single idler or a filter set, air freight is usually the practical answer.

Why do buyers choose Winnings for these parts?

Because somebody actually looks at what they send. We work across SANY, XCMG, ZOOMLION and FUWA machines and the engine brands behind them, so a mixed list can be quoted in one go, and every line is checked against the number before it is packed. Buyers who have tried a few crane parts suppliers usually say the same two things afterwards: the questions on the enquiry were the right ones, and the part that arrived was the part on the drawing.

What is the difference between an idler wheel and a tensioner?

The idler routes the belt; the tensioner is the spring-loaded arm that keeps that belt tight. On many engines they are separate parts that look similar from the outside, and mixing them up is a common ordering error. An idler has a fixed mounting point, as this one does with its single threaded stud, while a tensioner has a moving arm. Send a photograph of the bracket if you are not sure which of the two has failed.

Should I replace anything else while the belt is off?

Look at the belt itself, the tensioner and the accessories the belt drives before the new idler goes on — a worn belt will shorten the life of a new pulley, and a stiff or seized accessory will do the same. If the machine is in for a service anyway, it is worth adding the filters and the belt to the same order. Send us the list and we will tell you what is normally changed together on your engine.

Review

1/3
X