
The boom link panel for the SANY SCC1500C is the heavy steel plate that ties two boom section ends together at the joint. Part 21004866 sits between the sections, carries the pin axles through its bores and holds the joint in line while the boom takes load. It is a structural part rather than a wear pin, so it comes off when the bores open up, the plate bends or the joint stops lining up — not on a fixed service interval.
We supply it new, matched to the machine by number and checked against the parts list before it is packed. Crane rental yards, fleet workshops and contractors rebuilding an SCC1500C boom order the panel together with the pins, bushings and other SANY SCC1500C parts needed for the same job, and a single panel is as welcome as a full joint set. Service items come from the same desk: the team that handles this panel also runs the wider SANY crane parts range, including SANY filters, seal kits and hydraulic components for the same machines.

Panels are crane structural parts, cut from alloy steel — 35SiMn, 35SiMnMo or 28CrMnMo, depending on what the drawing calls for — then heat treated so the plate keeps its shape under repeated boom loading. The bores are machined rather than punched, which gives the pin the clearance the joint was designed around, and the boss faces are machined flat so the plate seats against the section end instead of rocking on it.
Every panel is supplied new, as heavy equipment spare parts should be. We do not pass off straightened, welded or re-bored plates as replacements, and each one is checked against its reference before packing. Paint goes on for protection in storage and transit; if your workshop needs the bores free of paint for fit-up, say so when you order and we will confirm what can be supplied.
Because these are load-bearing SANY SCC1500C parts, the drawing is what counts. If a panel is no longer listed for your build, send the original drawing — bore spacing, thickness and boss height are what we work to, and we confirm what can be made before anything is cut.
| Part number | 21004866 |
| Drawing reference | Q150.60.3 |
| Component | Boom link panel |
| Machine | SANY SCC1500C crawler crane |
| Product group | Crane boom parts |
| Material options | 35SiMn, 35SiMnMo, 28CrMnMo |
| Heat treatment | Hardened to the OEM specification |
| Pin bores | Twin bores, machined |
| Boss faces | Machined flat |
| Finish | Painted |
| Supplied as | Individual panel |
| Warranty | 2500 working hours or one year, whichever comes first |

| Payment terms | T/T; Western Union or as agreed |
| Minimum order | 1 piece |
| Lead time | Most parts in stock; usually 7-20 days, according to the quantity |
| Trade terms | EXW, FOB, CFR, CIF |
| Loading ports | Shanghai, Dalian, etc. |
| Warranty | 2500 working hours or one year |
| Packing | Plywood box |
| Urgent orders | Priority air freight on request |
| Multi-piece orders | Volume pricing on request |

Not sure which part fits your machine? Send the part number, the machine model, and a photo of the nameplate or the worn item, and our engineers — each with more than ten years in the construction machinery business — will confirm the correct reference and quote it. We advise on installation, help trace faults, and answer technical questions before and after dispatch. Since 2017 we have built this support on a supplier network covering FUWA, SANY, XCMG and ZOOMLION, so older and hard-to-find references can usually still be sourced.
Yes. We still supply crawler crane parts for older SCC1500C builds and earlier SANY models: send the machine model plus the number on the old plate, or a drawing if the number has gone. Where a reference has dropped off the list, we match it through our supplier network or have it made to drawing — which is what buyers need from crane parts suppliers when the machine is ten or fifteen years old. The same desk covers crane boom parts for the rest of the assembly.
Work from the plate itself rather than from the model alone. The number and drawing reference on the old panel, plus the machine serial number, let our engineers confirm the fit, and photos of the joint settle the rest. If the stamping has worn away, bore-to-bore spacing, plate thickness and boss height measured off the old plate identify it even when the part is worn — the same check we run on any construction machinery spare parts line before it ships.
The panel is supplied on its own. Pins, bushings and service items such as SANY filters are separate crane spare parts, and they are listed with the panel when you send your joint list so everything arrives together.
Yes. Where a reference is no longer available, or where your build differs from the standard, send the drawing and our engineers review bore spacing, thickness and boss height for these crane structural parts before anything is cut. Finish is worth agreeing up front: panels are painted for protection, and if your workshop prefers to paint after fitting, tell us and we will confirm what can be supplied.
Inspect both before deciding. If one bore has opened up, the opposite plate and the pin usually show related wear, and leaving one worn plate in place puts the load back onto the new part. Check the section ends and bushings in the same pass — the rule that applies to any heavy equipment spare parts joint that has been running loose.